Korea LG Data Comm

[View with PicLens]

12345►

Hong Kong Equinix

[View with PicLens]

1234►

I always try to get the best prices within the scope of common sense for clients. Mainly because as a integrated stack vendor, the pricing on one component can blow out the total price of the whole stack. And hardware is the first place to start (given an understanding of the management systems and risk credentials of the project at hand already).

One thorn in my side is mandated “Installation and Configuration” charges. Which are basically extortion attempts.

On the one hand no tech from SUN or IBM from their mainframe/mini computer division is going to know or be able to setup all variables in our system as we need – and as we will do over a long period of time – IE: the process of “Configuration” is Iterative and not finite to one small window of time. :-\

And going back to that whole vertical stack business. Why should a client pay a hardware vendor for support and then pay the integrator for support? These built in service charges make it harder for us to win business and sell anything as we have to protect ourselves as we will be doing the support – and that usually means that the client pays twice!

As much as these hardware firms like to chase the integrators and system builders as a great “Channel” to their products buyers in the market place. Mandatory setup and Configuration fees (Yes they apparently are mutually exclusive in charging if not in the vernacular of the Queen’s English!) are a great way of say “Up Yours” to said channel partners/integrators.

It is not yet clear who will get the Gold Medal – but the race is very competitive!

:-\

DRAC RESET

It is golden week here and all are away on break. So instead of forcing a staff member to come back, I thought I would take care of some stuff myself.

My problems started when a client who has a large advertising cluster, was running their main statistics database (for click fraud detection) on a Dell 1950 with only 1 SAS 15K drive.

I had suggested that this node, not being redundant like the tomcat servers be individually redundant, so DRAC card, redundant power and RAID.

Anyway, some new blades, Dell 1955′s arrived for the cluster and I thought, well, lets save the client some money, image the old 1950 DB server and load it onto a new 1955 server?

I thought this would be simple with Acronis.

No it wasn’t.

It turns out that a 3.5 Inch 73GB SAS drive is not the same size as a 2.5 Inch 73GB SAS drive. So I could not write my system image to the blades raid 1 array of 2 x 15K 73GB SAS drives.

Shite! If I reinstall the DB server it is not worth my time. Cheaper to buy the upgrade parts for the 1950.

Then I thought, well, I have LVM, I should be able to do this, after all I have used LVM before many times on large storage arrays.

So my goal was this, I needed a system image that was a couple hundred megs smaller than it was now, so it will go into the 1955′s ok.

This is where I added in VMWARE to the mix and made this an easy task. The steps are below:

1. Image the 1950 server to some ACRONIS TIB files somewhere. I used FTP
2. Image the TIB file to a new VPS made with a 73GB virtual disk
3. Create and attach a new 65GB virtual disk to the virtual machine
4. Image the MBR and /boot partitions using acronis onto the new 65GB virtual disk
5. Boot virtual machine with a rescue/live CD
6. Load FDISK for /dev/sdb and create a new LVM (Type 8e) partition in the remaining space on the 65GB virtual drive
7. Enter LVM with the “lvm” command
8. Activate all Volume Groups with the command “vgchange -a y”
9. EXIT out of LVM and then run this command to resize the EXT3 file system, “resize2fs /dev/VolGroup/LogVol00 40G”, you may have to run “e2fschk -f /dev/VolGroup00/LogVol00″ first too
10. Enter LVM again with the “lvm” command
11. Now we can reduce the Logical Volume that had the recently shrunk EXT3 file system on it with this command, “lvreduce LogVol00 -L 45G”
12. Because we are making a new custom boot image and we have already imaged over the /boot partition and MBR, we now want our old 73GB virtual drive to not have any of the same markings as our embryonic new 65GB virtual drive. To do this we need to change the Volume Group and Logical Volume names to something new:
13. lvrename VolGroup00 LogVol00 LogVol10
14. lvrename VolGroup00 LogVol01 LogVol11
15. lvchange LogVol10 -a n
16. lvchange LogVol11 -a n
17. vgchange VolGroup00 VolGroup10
18. Now we can create the new Logical Volumes and Volume Groups on the 65GB virtual disk in preparation for cloning our now 40GB EXT3 file system
19. Make a new Physical Volume first wit, “pvcreate /dev/sdb2″
20. pvscan
21. vgcreate VolGroup00 /dev/sdb2
22. vgscan
23. lvcreate VolGroup00 /dev/sdb2 -n LogVol01 -L 2G
24. lvcreate VolGroup00 /dev/sdb2 -n LogVol00 -L 50G
25. lvscan
26. Now we need to make our new LVM’s online and visible to the system so we run the command vgchange again, “vgchange -a y”
27. EXIT
28. Back at the command prompt we need to now setup our new SWAP partition, so we issue the command, “mkswap /dev/VolGroup00/LogVol01″
29. Now we can clone our old 40GB EXT3 partion that we shrunk to our new LVM which is larger than 40GB, but smaller than 65GB, so it will image onto the PE1955 2.5 SAS drive array
30. We use an old favourite for this, “dd if=/dev/VolGroup10/LogVol10 of=/dev/VolGroup00/LogVol00″
31. Once done, shutdown the VPS, boot up in Acronis and image the new 65GB virtual drive and then load it onto the PE1955 server. DONE!

I did all of this in single user mode so as to minimise the need for KUDZU to rescan and change all hardware. I can do this because of the hardware commonality in the 9th generation Dell servers.

Also once done, the new LVM will be smaller than the full capacity of the 73GB SAS 2.5 SAS drive. This is easily fixed while online. by making a new partition /dev/sda3 of LVM type (8e), making it into a Physical Volume, adding it to VolGroup00 and then extending the LogVol00 logical volume with the newly added extents. Once that is done, go back to the command prompt and use the ext2online command to finally expand your EXT3 partition to use all the space on the LVM.

This confused him. “If I have it, why do I have to pay for it?”. Well without getting into the nitty gritty of supply chain analysis, economies of scale and mass production relative to IP and licencing obligations. I tried to make him feel better by referring to some of the IBM pSeries servers that come with multiple CPU’s but only one can be used unless you buy an activation key from IBM to enable subsequent processors.

At the end of the day I can see his point and also Dell’s.